Brominated flame retardants are currently the most widely used because they are simply very effective - efficient to manufacture, stable at high temperatures and can be produced cost-effectively. They can be found in various products such as automobiles, electronics, textiles and furniture. Global consumption of flame retardants is estimated at 2.4 million tons¹. More than half of these are used in electrical and electronic applications such as e-mobility. However, brominated - i.e. halogenated - flame retardants are problematic: they can be detected in soil, water, sewage sludge or even in wild animals. In addition, toxic emissions are produced when they are burned. There is therefore an urgent need for less harmful flame retardants.

Green chemistry

Previous studies have shown that many phosphorus compounds in flame retardant applications are safer and less toxic than brominated flame retardants. However, holistic and quantifying life cycle studies of these flame retardants from cradle to grave have been lacking until now. On behalf of Clariant, Fraunhofer UMSICHT has now compared the environmental impact of flame-retardant plastics for charging plugs and electronic devices in a life cycle analysis for the first time. At the same time, this analysis is part of a case study for the European Commission in accordance with the "Safe and Sustainable by Design" guideline, which provides for life cycle assessments - and not just toxicity - as an evaluation criterion in the development of chemicals. The company Clariant markets the investigated flame retardant formulation under the trade name Exolit® OP 1400. Exolit OP 1400 contains the flame retardant diethylphosphinic acid (DEPAL), which requires yellow phosphorus, caustic soda and calcium hydroxide, among others, for its production.

Lower environmental impact - high potential

The researchers came to the conclusion that the overall environmental impact of Exolit OP 1400 is lower and therefore represents a viable alternative to conventional brominated flame retardants in engineering plastics. "The use of organophosphorus flame retardants such as aluminum diethyl phosphinate (DEPAL) significantly reduces the negative effects on human health and the environment," explains Dr. Daniel Maga, author of the life cycle assessment at Fraunhofer UMSICHT. The main environmental benefit is the conservation of resources, as no antimony trioxide is required, as is the case with brominated formulations. Antimony has been one of the 14 raw materials classified as critical by the EU since 2010. The CO₂ footprint of the phosphorus alternative is only slightly smaller than that of brominated flame retardants, which is mainly due to the energy-intensive extraction of phosphorus from phosphate rock. However, this could be reduced by using a higher proportion of renewable energies in phosphorus production. Furthermore, the disposal of Exolit OP 1400 is less harmful to the environment and will enable better recycling in the future.

_{^1: S&P Global. Flame Retardants:Specialty Chemicals Update Program , 2019. https://www.spglobal.com/commodityinsights/en/ci/products/chemical-flame-retardants-scup.html.}